Read start4.elf bytes 2232384 hnd 0x00002d0e Read fixup4.dat bytes 5443 hnd 0x00002a61 Firmware: 03df0e450c356822f03454c27edea347fd8d211b Jun 8 2021 13:06:28 0x00c03140 0x00000000 0x000003ff MEM GPU: 76 ARM: 948 TOTAL: 1024 Starting start4.elf @ 0xfec00200 partition 0 PCI reset + MESS:00:00:04.351458:0: arasan: arasan_emmc_open MESS:00:00:04.555171:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:04.558018:0: brfs: File read: 386 bytes MESS:00:00:04.611400:0: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:04.620916:0: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:04.630424:0: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:04.639938:0: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:04.649448:0: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:04.658963:0: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:04.668471:0: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:04.677986:0: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:04.687496:0: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:04.697011:0: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:04.701510:0: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:04.726803:0: HDMI1:EDID error reading EDID block 0 attempt 0 MESS:00:00:04.736318:0: HDMI1:EDID error reading EDID block 0 attempt 1 MESS:00:00:04.745828:0: HDMI1:EDID error reading EDID block 0 attempt 2 MESS:00:00:04.755343:0: HDMI1:EDID error reading EDID block 0 attempt 3 MESS:00:00:04.764851:0: HDMI1:EDID error reading EDID block 0 attempt 4 MESS:00:00:04.774365:0: HDMI1:EDID error reading EDID block 0 attempt 5 MESS:00:00:04.783875:0: HDMI1:EDID error reading EDID block 0 attempt 6 MESS:00:00:04.793389:0: HDMI1:EDID error reading EDID block 0 attempt 7 MESS:00:00:04.802896:0: HDMI1:EDID error reading EDID block 0 attempt 8 MESS:00:00:04.812410:0: HDMI1:EDID error reading EDID block 0 attempt 9 MESS:00:00:04.816911:0: HDMI1:EDID giving up on reading EDID block 0 MESS:00:00:04.824623:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:04.827617:0: gpioman: gpioman_get_pin_num: pin DISPLAY_SDA not defined MESS:00:00:04.834491:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined MESS:00:00:04.862440:0: gpioman: gpioman_get_pin_num: pin FLASH_0_ENABLE not defined MESS:00:00:04.867072:0: gpioman: gpioman_get_pin_num: pin FLASH_0_INDICATOR not defined MESS:00:00:04.874813:0: gpioman: gpioman_get_pin_num: pin FLASH_0_ENABLE not defined MESS:00:00:04.882263:0: gpioman: gpioman_get_pin_num: pin FLASH_0_INDICATOR not defined MESS:00:00:05.377837:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined MESS:00:00:05.383475:0: *** Restart logging MESS:00:00:05.386119:0: brfs: File read: 386 bytes MESS:00:00:05.395880:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:05.405915:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:05.415953:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:05.425984:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:05.436024:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:05.446057:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:05.456095:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:05.466125:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:05.476162:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:05.486196:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:05.491225:0: hdmi: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:05.501848:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:05.511882:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:05.521920:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:05.531950:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:05.541989:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:05.552022:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:05.562060:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:05.572090:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:05.582128:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:05.592162:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:05.597192:0: hdmi: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:05.602791:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead MESS:00:00:05.616580:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0 MESS:00:00:05.626620:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 1 MESS:00:00:05.636654:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 2 MESS:00:00:05.646692:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 3 MESS:00:00:05.656727:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 4 MESS:00:00:05.666765:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 5 MESS:00:00:05.676798:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 6 MESS:00:00:05.686836:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 7 MESS:00:00:05.696867:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 8 MESS:00:00:05.706905:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 9 MESS:00:00:05.711929:0: hdmi: HDMI1:EDID giving up on reading EDID block 0 MESS:00:00:05.722551:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0 MESS:00:00:05.732589:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 1 MESS:00:00:05.742622:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 2 MESS:00:00:05.752660:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 3 MESS:00:00:05.762691:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 4 MESS:00:00:05.772729:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 5 MESS:00:00:05.782762:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 6 MESS:00:00:05.792800:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 7 MESS:00:00:05.802830:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 8 MESS:00:00:05.812868:0: hdmi: HDMI1:EDID error reading EDID block 0 attempt 9 MESS:00:00:05.817891:0: hdmi: HDMI1:EDID giving up on reading EDID block 0 MESS:00:00:05.823489:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead MESS:00:00:05.832254:0: HDMI0: hdmi_pixel_encoding: 300000000 MESS:00:00:05.837726:0: HDMI1: hdmi_pixel_encoding: 300000000 MESS:00:00:05.843644:0: dtb_file 'bcm2711-rpi-cm4.dtb' MESS:00:00:05.848267:0: gpioman: gpioman_get_pin_num: pin CAMERA_0_I2C_PORT not defined MESS:00:00:05.860044:0: dtb_file 'bcm2711-rpi-cm4.dtb' MESS:00:00:05.868672:0: brfs: File read: /mfs/sd/bcm2711-rpi-cm4.dtb MESS:00:00:05.871918:0: Loading 'bcm2711-rpi-cm4.dtb' to 0x100 size 0xc032 MESS:00:00:05.891097:0: brfs: File read: 49202 bytes MESS:00:00:05.962274:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:05.973074:0: brfs: File read: 386 bytes MESS:00:00:05.977119:0: brfs: File read: /mfs/sd/cmdline.txt MESS:00:00:05.980138:0: Read command line from file 'cmdline.txt': MESS:00:00:05.986030:0: 'root=NAME=netbsd-root console=com0' MESS:00:00:06.995907:0: brfs: File read: 70 bytes MESS:00:00:07.477981:0: brfs: File read: /mfs/sd/netbsd.img MESS:00:00:07.480452:0: Loading '/netbsd.img' to 0x200000 size 0x5f50a3 MESS:00:00:08.315072:0: Device tree loaded to 0x2eff3b00 (size 0xc4cc) MESS:00:00:08.320043:0: uart: Set PL011 baud rate to 103448.300000 Hz MESS:00:00:08.327565:0: uart: Baud rate change done... MESS:00:00:08.329588:0:boot NetBSD/aarch64 PC = 0000000000200838 SP = 0000000001178000 CurrentEL = 0000000000000002 SCTLR_EL2 = 0000000030c50830 HCR_EL2 = 0000000000000000 SPSR_EL1 = 0000000000000010 CNTFREQ_EL0 = 000000000337f980 SCTLR_EL1 = 0000000000c50838 MIDR_EL1 = 00000000410fd083 MPIDR_EL1 = 0000000080000000 ID_AA64MPFR0_EL1 = 0000000000002222 ID_AA64MPFR1_EL1 = 0000000000000000 ID_AA64ISAR0_EL1 = 0000000000010000 ID_AA64ISAR1_EL1 = 0000000000000000 ID_AA64MMFR0_EL1 = 0000000000001124 ID_AA64MMFR1_EL1 = 0000000000000000 Drop to EL1...OK CurrentEL = 0000000000000001 TTBR0 = 000000000131a000 TTBR1 = 0000000001319000 Creating identity mapping for CONSADDR pmapboot_enter: va=0x00000000fe215040, pa=0x00000000fe215040, size=0x0000000000200000, blocksize=0x0000000000200000, attr=0x006000000000000c Creating identity mapping for kernel image pmapboot_enter: va=0x0000000000200040, pa=0x0000000000200040, size=0x0000000001218808, blocksize=0x0000000000200000, attr=0x0040000000000000 Creating identity mapping for FDT pmapboot_enter: va=0x000000002eff3b00, pa=0x000000002eff3b00, size=0x0000000000200000, blocksize=0x0000000000200000, attr=0x0060000000000000 Creating KVA=PA tables pmapboot_enter: va=0xffffc00000000040, pa=0x0000000000200040, size=0x0000000001118808, blocksize=0x0000000000200000, attr=0x0040000000000000 OK MMU Enable...OK SPSR_EL1 = 0000000000000010 DAIF = 0000000000000000 vstart = ffffc00000001898 PC = ffffc00000001898 SP(lwp0,kvm) = ffffc00000f77ed0 curlwp = ffffc00000cfb780 initarm [ 1.0000000] FDT<0x2eff3b00> [ 1.0000000] cpufunc [ 1.0000000] devmap 0xffffc00000814310 [ 1.0000000] pmap_devmap_bootstrap: [ 1.0000000] devmap: pa fe000000-feffffff = va fffffffffe000000 [ 1.0000000] Creating L2 tables: fffffffffe000000-fffffffffeffffff : 00000000fe000000-00000000feffffff [ 1.0000000] pmapboot_enter: va=0xfffffffffe000000, pa=0xfe000000, size=0x1000000, blocksize=0x200000, attr=0x01e000000000040c [ 1.0000000] devmap: pa ff800000-ff8fffff = va ffffffffff800000 [ 1.0000000] Creating L3 tables: ffffffffff800000-ffffffffff8fffff : 00000000ff800000-00000000ff8fffff [ 1.0000000] pmapboot_enter: va=0xffffffffff800000, pa=0xff800000, size=0x100000, blocksize=0x1000, attr=0x01e000000000040c [ 1.0000000] devmap: pa 00000000-00000fff = va fffffffff0000000 [ 1.0000000] Creating L3 tables: fffffffff0000000-fffffffff0000fff : 0000000000000000-0000000000000fff [ 1.0000000] pmapboot_enter: va=0xfffffffff0000000, pa=0x0, size=0x1000, blocksize=0x1000, attr=0x01e000000000040c [ 1.0000000] bootstrap [ 1.0000000] bcm283x_bootparams: memory size 994050048 [ 1.0000000] bcm283x_bootparams: arm clock 600000000 [ 1.0000000] bcm283x_bootparams: vpu clock 500000000 [ 1.0000000] bcm283x_bootparams: emmc clock 250000000 [ 1.0000000] bcm283x_bootparams: emmc2 clock 250000000 [ 1.0000000] bcm283x_bootparams: firmware rev 60bf6b54 [ 1.0000000] bcm283x_bootparams: board model 0 [ 1.0000000] bcm283x_bootparams: mac-address 40b0ff32a6dc [ 1.0000000] bcm283x_bootparams: board rev c03140 [ 1.0000000] bcm283x_bootparams: board serial 100000006ef05a6f [ 1.0000000] bcm283x_bootparams: DMA channel mask 0x000037f5 [ 1.0000000] bcm283x_bootparams: cmdline bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:FF:B0:40 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=NAME=netbsd-root console=com0 [ 1.0000000] stdout [ 1.0000000] consinit ok [ 1.0000000] uboot: args 0x2eff3b00, 0, 0, 0 [ 1.0000000] NetBSD/evbarm (fdt) booting ... [ 1.0000000] FDT /memory @ 0x0 size 0x3b400000 [ 1.0000000] FDT /memory @ 0x40000000 size 0xbc000000 [ 1.0000000] initarm: memory start 0 end fc000000 (len fc000000) [ 1.0000000] initarm: fdt_build_bootconfig [ 1.0000000] Usable memory: [ 1.0000000] 1000 - 3b3fffff [ 1.0000000] 40000000 - fbffffff [ 1.0000000] Creating L3 tables: ffff000000001000-ffff0000001fffff : 0000000000001000-00000000001fffff [ 1.0000000] pmapboot_enter: va=0xffff000000001000, pa=0x1000, size=0x1ff000, blocksize=0x1000, attr=0x0060000000000000 [ 1.0000000] Creating L2 tables: ffff000000200000-ffff00003b3fffff : 0000000000200000-000000003b3fffff [ 1.0000000] pmapboot_enter: va=0xffff000000200000, pa=0x200000, size=0x3b200000, blocksize=0x200000, attr=0x0060000000000000 [ 1.0000000] Creating L1 tables: ffff000040000000-ffff0000bfffffff : 0000000040000000-00000000bfffffff [ 1.0000000] pmapboot_enter: va=0xffff000040000000, pa=0x40000000, size=0x80000000, blocksize=0x40000000, attr=0x0060000000000000 [ 1.0000000] Creating L2 tables: ffff0000c0000000-ffff0000fbffffff : 00000000c0000000-00000000fbffffff [ 1.0000000] pmapboot_enter: va=0xffff0000c0000000, pa=0xc0000000, size=0x3c000000, blocksize=0x200000, attr=0x0060000000000000 [ 1.0000000] cpu_kernel_vm_init: kernel phys start 200000 end 1319000+f000 [ 1.0000000] bootargs: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:FF:B0:40 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=NAME=netbsd-root console=com0 [ 1.0000000] Memory regions: [ 1.0000000] 1000 - 1fffff [ 1.0000000] 1328000 - 3b3fffff [ 1.0000000] 40000000 - fbffffff [ 1.0000000] ------------------------------------------ [ 1.0000000] kern_vtopdiff = 0xffffbfffffe00000 [ 1.0000000] physical_start = 0x0000000000001000 [ 1.0000000] kernel_start_phys = 0x0000000000200000 [ 1.0000000] kernel_end_phys = 0x0000000001319000 [ 1.0000000] pagetables_start_phys = 0x0000000001319000 [ 1.0000000] pagetables_end_phys = 0x0000000001328000 [ 1.0000000] msgbuf = 0x000000003b3f0000 [ 1.0000000] physical_end = 0x00000000fc000000 [ 1.0000000] VM_MIN_KERNEL_ADDRESS = 0xffffc00000000000 [ 1.0000000] kernel_start_l2 = 0xffffc00000000000 [ 1.0000000] kernel_start = 0xffffc00000000000 [ 1.0000000] kernel_end = 0xffffc00001119000 [ 1.0000000] (extra) = 0x000000000000f000 [ 1.0000000] kernel_end_l2 = 0xffffc00001200000 [ 1.0000000] module_start = 0xffffc00001200000 [ 1.0000000] module_end = 0xffffc00003200000 [ 1.0000000] (kernel va area) = 0xffffc00040000000 [ 1.0000000] (devmap va area) = 0xfffffffff0000000 [ 1.0000000] VM_MAX_KERNEL_ADDRESS = 0xffffffffffe00000 [ 1.0000000] ------------------------------------------ [ 1.0000000] block 0 start 00001000 end 3b3f0000 [ 1.0000000] bp 0 start 00001000 end 00200000 [ 1.0000000] start 00001000 end 00200000... loading in freelist 0 [ 1.0000000] bp 1 start 01328000 end 3b400000 [ 1.0000000] start 01328000 end 3b3f0000... loading in freelist 0 [ 1.0000000] block 1 start 40000000 end fc000000 [ 1.0000000] bp 0 start 00001000 end 00200000 [ 1.0000000] bp 1 start 01328000 end 3b400000 [ 1.0000000] bp 2 start 40000000 end fc000000 [ 1.0000000] start 40000000 end fc000000... loading in freelist 0 [ 1.0000000] mpstart [CPU1] PC = 0000000000201ab8 [CPU1] SP = 0000000001178100 [CPU1] CurrentEL = 0000000000000002 [CPU1] SCTLR_EL2 = 0000000030c50830 [CPU1] HCR_EL2 = 0000000000000000 [CPU1] SPSR_EL1 = 0000000000000010 [CPU1] SCTLR_EL1 = 0000000000c50838 [CPU1] MIDR_EL1 = 00000000410fd083 [CPU1] MPIDR_EL1 = 0000000080000001 [CPU1] Drop to EL1... [CP [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.85 (ALMOND1) #1: Fri Jul 16 23:53:06 JST 2021 [ 1.0000000] mochid@coco:/vol1/shed/coco/mochid/obj-kern/evbarm-GENERIC64-1.177/ALMOND1 [ 1.0000000] total memory = 3938 MB [ 1.0000000] avail memory = 3801 MB [ 1.0000000] armfdt0 (root) [ 1.0000000] simplebus0 at armfdt0: Raspberry Pi Compute Module 4 Rev 1.0 [ 1.0000000] simplebus1 at simplebus0 [ 1.0000000] simplebus2 at simplebus0 [ 1.0000000] cpus0 at simplebus0 [ 1.0000000] simplebus3 at simplebus0 [ 1.0000000] simplebus4 at simplebus0 [ 1.0000000] simplebus5 at simplebus0 [ 1.0000000] simplebus6 at simplebus0 [ 1.0000000] cpu0 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x0 [ 1.0000000] cpu1 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x1 [ 1.0000000] cpu2 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x2 [ 1.0000000] cpu3 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x3 [ 1.0000000] gic0 at simplebus1: GIC [ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid) [ 1.0000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs [ 1.0000000] syscon0 at simplebus1: System Controller Registers [ 1.0000000] fclock0 at simplebus2: 54000000 Hz fixed clock (osc) [ 1.0000000] syscon1 at simplebus1: couldn't get registers [ 1.0000000] bcmcprman0 at simplebus1: BCM283x Clock Controller [ 1.0000000] bcmaux0 at simplebus1 [ 1.0000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg) [ 1.0000000] fclock2 at simplebus0sysctl_createv: sysctl_create(108MHz-clock) returned 22 fclock2: failed to create sysctl node for 108MHz-clock (108MHz-clock): 22 [ 1.0000000] : 108000000 Hz fixed clock (108MHz-clock) [ 1.0000000] fclock3 at simplebus0sysctl_createv: sysctl_create(27MHz-clock) returned 22 fclock3: failed to create sysctl node for 27MHz-clock (27MHz-clock): 22 [ 1.0000000] : 27000000 Hz fixed clock (27MHz-clock) [ 1.0000000] bcmicu0 at simplebus1: Multiprocessor [ 1.0000000] gtmr0 at simplebus0: Generic Timer [ 1.0000000] gtmr0: interrupting on GIC irq 27 [ 1.0000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual) [ 1.0000030] bcmgpio0 at simplebus1: GPIO controller 2838 [ 1.0000030] bcmgpio0: pins 0..31 interrupting on GIC irq 145 [ 1.0000030] bcmgpio0: pins 32..58 interrupting on GIC irq 146 [ 1.0000030] gpio0 at bcmgpio0: 58 pins [ 1.0000030] gregulator0 at simplebus0: vdd-sd-io [ 1.0000030] gregulator0: cannot get pin 0 [ 1.0000030] fregulator0 at simplebus0: vcc-sd [ 1.0000030] plcom0 at simplebus1: ARM PL011 UART [ 1.0000030] plcom0: txfifo disabled [ 1.0000030] plcom0: interrupting on GIC irq 153 [ 1.0000030] com0 at simplebus1: BCM AUX UART, 1-byte FIFO [ 1.0000030] com0: console [ 1.0000030] com0: interrupting on GIC irq 125 [ 1.0000030] fregulator1 at simplebus0: 3v3 [ 1.0000030] fregulator2 at simplebus0: 5v0 [ 1.0000030] /soc/avs-monitor@7d5d2000/thermal at syscon0 not configured [ 1.0000030] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 [ 1.0000030] /soc/power at simplebus1 not configured [ 1.0000030] /phy at simplebus0 not configured [ 1.0000030] bcmmbox0 at simplebus1: VC mailbox [ 1.0000030] bcmmbox0: interrupting on GIC irq 65 [ 1.0000030] vcmbox0 at bcmmbox0 [ 1.0000030] /scb/pcie@7d500000 at simplebus3 not configured [ 1.0000030] genet0 at simplebus3: GENETv5.0 [ 1.0000030] genet0: Ethernet address dc:a6:32:ff:b0:40 [ 1.0000030] brgphy0 at genet0 phy 0: BCM54213PE 1000BASE-T media interface, rev. 2 [ 1.0000030] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000030] genet0: interrupting on GIC irq 189 [ 1.0000030] /soc/mailbox@7e00b840 at simplebus1 not configured [ 1.0000030] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller [ 1.0000030] /soc/rng@7e104000 at simplebus1 not configured [ 1.0000030] sdhc0 at simplebus1: SDHC controller [ 1.0000030] sdhc0: interrupting on GIC irq 158 [ 1.0000030] gpioleds0 at simplebus0: led0 [ 1.0000030] sdhc1 at simplebus4: SDHC controller [ 1.0000030] sdhc1: interrupting on GIC irq 158 [ 1.0000030] /scb/dma@7e007b00 at simplebus3 not configured [ 1.0000030] /soc/timer@7e003000 at simplebus1 not configured [ 1.0000030] /soc/fb at simplebus1 not configured [ 1.0000030] /soc/vcsm at simplebus1 not configured [ 1.0000030] armpmu0 at simplebus0: Performance Monitor Unit [ 1.0000030] /soc/gpiomem at simplebus1 not configured [ 1.0000030] /scb/hevc-decoder@7eb00000 at simplebus3 not configured [ 1.0000030] /scb/rpivid-local-intc@7eb10000 at simplebus3 not configured [ 1.0000030] /scb/h264-decoder@7eb20000 at simplebus3 not configured [ 1.0000030] /scb/vp9-decoder@7eb30000 at simplebus3 not configured [ 1.0000030] entropy: WARNING: extracting entropy too early [ 1.4448758] sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks [ 1.4548796] sdmmc0 at sdhc0 slot 0 [ 1.4548796] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks [ 1.4748798] sdmmc1 at sdhc1 slot 0 [ 1.4948799] armpmu0: interrupting on GIC irq 48 [ 1.5048809] armpmu0: interrupting on GIC irq 49 [ 1.5148794] armpmu0: interrupting on GIC irq 50 [ 1.5148794] armpmu0: interrupting on GIC irq 51 [ 1.6548868] sdmmc1: SD card status: 4-bit, C10, A1 [ 1.6548868] ld1 at sdmmc1: <0x03:0x5344:ABLCD:0x80:0x2c8d2a28:0x112> [ 1.6648874] ld1: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors [ 1.6748885] dk0 at ld1: "EFI", 163840 blocks at 3, type: msdos [ 1.6748885] dk1 at ld1: "netbsd-root", 62169088 blocks at 163843, type: ffs [ 1.6913184] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 1.7157229] sdmmc0: 4-bit width, 50.000 MHz [ 1.7257236] sdmmc0: SDIO function [ 1.7257236] bwfm0 at sdmmc0 function 1 [ 1.7357292] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured [ 1.7457244] (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 function 3 not configured [ 1.7657254] WARNING: 4 errors while detecting hardware; check system log. [ 1.7657254] boot device: ld1 [ 1.7764708] root on dk1 [ 1.7857270] root file system type: ffs [ 1.7857270] kern.module.path=/stand/evbarm/9.99.85/modules [ 1.8000144] WARNING: no TOD clock present [ 1.8000144] WARNING: using filesystem time [ 1.8082273] WARNING: CHECK AND RESET THE DATE! [ 1.8382108] bwfm0: NVRAM file not available Sun Jul 18 11:37:04 JST 2021 Starting root file system check: /dev/rdk1: file system is clean; not checking Not resizing / (NAME=netbsd-root): already correct size Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting file system checks: /dev/rdk0: 93 files, 16440 free (4110 clusters) [ 6.5684856] entropy: ready Loaded entropy from /var/db/entropy-file. Setting tty flags. Starting network. Hostname: arm64 IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Starting dhcpcd. Starting mdnsd. Building databases: dev, utmp, utmpx. Starting syslogd. Mounting all file systems... Clearing temporary files. Updating fontconfig cache: done. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. Starting devpubd. Starting local daemons:. Updating motd. Starting ntpd. Starting sshd. Jul 18 11:37:13 arm64 ntpd[1105]: error resolving pool 2.netbsd.pool.ntp.org: Temporary failure in name resolution (2) Starting postfix. Starting inetd. Starting cron. Sun Jul 18 11:37:17 JST 2021 NetBSD/evbarm (arm64) (constty) login: root    root Jul 18 11:37:29 arm64 login: ROOT LOGIN (root) on tty constty Last login: Sun Jul 18 08:37:25 2021 on constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.85 (ALMOND1) #1: Fri Jul 16 23:53:06 JST 2021 Welcome to NetBSD! This is a development snapshot of NetBSD for testing -- user beware! Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ You have new mail. We recommend that you create a non-root account and use su(1) for root access. arm64# date Sun Jul 18 11:37:32 JST 2021 arm64# date 2152 Sun Jul 18 21:52:00 JST 2021 Jul 18 21:52:00 arm64 date: date set by root arm64# Jul 18 21:52:41 arm64 ntpd[1105]: error resolving pool 2.netbsd.pool.ntp.org: Temporary failure in name resolution (2) Jul 18 21:53:46 arm64 ntpd[1105]: error resolving pool 2.netbsd.pool.ntp.org: Temporary failure in name resolution (2)